AI or PDF is the recommended file format for printing.
We also accept JPEG / EPS / PSD / TIFF format that has good resolution (300 DPI or higher)
If you would like to use a different format, please contact our customer support.
·Difference between AI and JPEG
Square or Rectangle
- Square or Rectangle
- Circle or Oval
Background Bleed (54x54mm)
Movement of 1-2mm may occur during
cutting process. Please extend the
background colour (if any) to this line.
Trim Line (50x50mm)
It is the actual size of the
Inside Safety Bleed (46x46mm)
Please include the important contents and
designs within the inside the safety bleed.
Please make sure that your design is set in CMYK colour mode for printing.
CMYK is the colour scheme used for mixing colour in graphic designs,
while RGB is associated with electronic displays, such as TV screens, monitors, camera, etc.
Images with resolution at 300DPI or higher is recommended.
Images created for websites generally have a resolution of 72 DPI (Dots Per Inch). This is much lower than what is required for good quality print.
If the artwork is supplied at a low resolution, the printed image may appear blurred, jagged and rough.
Please make sure the fonts are outlined if you are working on Adobe Illustrator or Photoshop.
If the fonts are not outlined, the designated fonts may be replaced with other fonts or may be displayed incorrectly.
If there are image files added to your design, please make sure they are embedded.
If images are not embedded properly, they would not be found or displayed properly.
FONT SIZE & STROKE
It is recommended to design with fonts of 4pt or more. Small characters may be crushed and difficult to read.
Please design and create a line thickness of 0.25pt or more. Thin lines or small designs may not be visible once printed on sticker.
Cutting movement of 1 to 2mm will not be subject to defects due to mechanical tolerances. Please consider carefully before designing.
Design without border >>> The misalignment is less obvious without the uneven border. [Recommended]